10" Green Concrete Saw Norton GC25EUP 115/230V Early Entry Saw Electric Interio

Description

New 10" Norton GC25EUP Early Entry Green Concrete Electric Saw
Presented is a new 10" Early Entry Electric saw from Norton Clipper Construction Products. The 3HP 115/230 volt, single phase motor produces ample power for the same applications as the GC55 but can be used where fuel engines are not accepted, making this saw perfect for any fleet or contractor. Designed for small to medium size jobs in green, cured or even the popular decorative markets, the versatility of the GC25E is unmatched. Front blade mounting keeps the blade in the cut and specially designed wheels provide smooth operation, all with a folding, compact frame that a single operator can manage. It’s a small saw with big features.
Specifications: Model GC25EUP, UPC 70184642445
The ideal saw for indoor cutting, expansion joint cleaning, crack control and other concrete surface preparation work. The GC25E carries a smooth running 2.5 HP up-cut electric motor. Its vacuum port on the blade guard ensure debris is pulled out of the cut and into a collection system. light-weight and compact, the GC25EUP is the perfect saw for any concrete surface or decorative contractor need.
Improved wheel design provides stable cutting over debris and keeps saw in line of cut
Heavy-duty pointer provides a straighter cut
Compact, low profile, reinforced frame stabilizes saw for a smoother operation, even over debris
Technical Specifications: GC 25EUP
Product Number 701846 42445 5
Blade Guard Capacity – in (mm) 10" (254)
Maximum Depth of Cut – in (mm) 3-3/4" (95)
Arbor Size – in (mm) 5/8" (15.9)
Blade Flange Diameter – in (mm) 3-5/64" (78)
Blade Shaft RPM 3,000
Blade Shaft Diameter – in (mm) 7/8" (20)
Blade Shaft Bearings: Sealed Radial Bearings
Blade Shaft Drive: 1 Cogged
Blade Guard Attachment: All Steel
Blade Control: Screw Feed
Axle – Front – in (mm) 55/64" (22)
Axle – Rear – in (mm) 55/64" (22)
Wheels – Front – in (mm) D x W x B 3-3/8"x2-3/4"x25/32" (85x70x20)
Wheels – Rear – in (mm) D x W x B 3-3/8"x2-3/4"x25/32" (85x70x20)
Handle Bars/Adjustment Length – in (mm) 6" (152.4)
Control: Push
Chassis: Heavy Duty Stamped Steel with Reinforcements
Power Source: 115/330 volt
Motor/Engine Type: Electric, Geffen
Specifications: T.E.F.C. Thermal Protection
Maximum Horsepower* 2 HP
Net Horse Power* 2 HP
Voltage: 115-230 Volts
Cycle*/Current/Phase: 60Hz/AC/1
Full Load Amps* 19.5/9.73 Amps
Starting Amps* 91/46 Amps
Engine Cooling: Forced Air
Saw Dimensions: Height – in (mm) 24-7/32" (615)
Minimum Saw Length: (Transport) – in (mm) 32" (813)
Maximum Saw Length: (Working) – in (mm) 42-29/32" (1090)
Maximum Pointer Length: – in (mm) 8-7/32" (209)
Frame Width – in (mm): 13-11/16" (348)
Saw Width – in (mm): 18-1/8" (460)
Front (Outside to Outside Wheel Width) – in (mm) 8-21/32" (220)
Rear (Outside to Outside Wheel Width) – in (mm) 13" (330)
Blade to Wall – in (mm): 7-1/2" (190)
Wheel Base Length – in (mm): 19" (483)
Blade Shaft Maximum Height – in (mm): 9-41/64" (245)
Weight Crated – lbs (kg) 135 lbs (61 kg)
Weight Uncrated – lbs (kg) 115 lbs (52 kg)
*= Data provided by motor/engine manufacturer